powerdi is a registered trademark of diodes incorporated. dmg3025lfg document number: ds35642 rev. 5 ? 2 1 of 6 www.diodes.com november 2012 ? diodes incorporated dmn3025lfg new product 30v n-channel enhanc ement mode mosfet powerdi ? product summary v (br)dss r ds(on) max i d max t a = +25c 30v 18m ? @ v gs = 10v 7.5a 28m ? @ v gs = 4.5v 6.1a description this mosfet has been designed to minimize the on-state resistance (r ds(on) ) and yet maintain superior switching performance, making it ideal for high efficiency po wer management applications. applications ? backlighting ? power management functions ? dc-dc converters features ? low r ds(on) ? ensures on state losses are minimized ? small form factor thermally efficient package enables higher density end products ? occupies just 33% of the board area occupied by so-8 enabling smaller end product ? 100% unclamped inductive switch (uis) test in production ? totally lead-free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. ?green? device (note 3) ? qualified to aec-q101 standards for high reliability mechanical data ? case: powerdi3333-8 ? case material: molded plastic, "green" molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminal connections i ndicator: see diagram ? terminals: finish ? matte tin annealed over copper leadframe. solderable per mil-std-202, method 208 ? weight: 0.072 grams (approximate) ordering information (note 4) part number case packaging DMN3025LFG-7 powerdi3333-8 2000/tape & reel dmn3025lfg-13 powerdi3333-8 3000/tape & reel notes: 1. no purposely added lead. fully eu directiv e 2002/95/ec (rohs) & 2011/6 5/eu (rohs 2) compliant. 2. see http://www.diodes.com for more in formation about diodes incorpor ated?s definitions of halogen- and antimony-free, "gree n" and lead-free. ? 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm br omine, <900ppm chlorine (<1500ppm t otal br + cl) and <1000ppm antimony compounds. 4. for packaging details, go to our website at http://www.diodes.com. marking information top view internal schematic top view 1 2 3 4 8 7 6 5 bottom view powerdi3333-8 s s s g d d d d pin 1 n25 = product type marking code yyww = date code marking yy = last digit of year (ex: 11 = 2011) ww = week code (01 ~ 53) n25 yyww
powerdi is a registered trademark of diodes incorporated. dmg3025lfg document number: ds35642 rev. 5 ? 2 2 of 6 www.diodes.com november 2012 ? diodes incorporated dmn3025lfg new product maximum ratings (@t a = +25c, unless otherwise specified.) characteristic symbol value units drain-source voltage v dss 30 v gate-source voltage v gss 20 v continuous drain current (note 5) v gs = 10v steady state t a = +25 c t a = +70 c i d 7.5 6.1 a t<10s t a = +25 c t a = +70 c i d 10 7.8 a maximum continuous body diode forward current (note 5) i s 2.5 a pulsed drain current (10s pulse, duty cycle = 1%) i dm 60 a avalanche current (note 6) l = 0.1mh i ar 14 a avalanche energy (note 6) l = 0.1mh e ar 10 mj thermal characteristics characteristic symbol value units total power dissipation (note 5) t a = +25c p d 2.0 w t a = +70c 1.3 thermal resistance, junction to ambient (note 5) steady state r ja 61 c/w t < 10s 37 thermal resistance, junction to case r electrical characteristics (@t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition off characteristics (note 7) drain-source breakdown voltage bv dss 30 ? ? v v gs = 0v, i d = 250 a zero gate voltage drain current i dss ? ? 1 a v ds = 30v, v gs = 0v gate-source leakage i gss ? ? 1 a v gs = 20v, v ds = 0v on characteristics (note 7) gate threshold voltage v gs ( th ) 0.8 ? 2.0 v v ds = v gs , i d = 250 a static drain-source on-resistance r ds (on) ? 14 18 m v gs = 10v, i d = 7.8a ? 23 28 v gs = 4.5v, i d = 7.0a forward transfer admittance |y fs | ? 9 - s v ds = 10v, i d = 7.8a diode forward voltage v sd ? 0.70 1.0 v v gs = 0v, i s = 6.3a dynamic characteristics (note 8) input capacitance c iss ? 605 ? pf v ds = 15v, v gs = 0v, f = 1.0mhz output capacitance c oss ? 74 ? reverse transfer capacitance c rss ? 58 ? gate resistance r g ? 1.5 ? v ds = 0v, v gs = 0v, f = 1.0mhz total gate charge (v gs = 4.5v) q g ? 5.3 ? nc v ds = 15v, i d = 7.8a total gate charge (v gs = 10v) q g ? 11.6 ? gate-source charge q g s ? 2 ? gate-drain charge q g d ? 2.4 ? turn-on delay time t d ( on ) ? 3.8 ? ns v dd = 15v, v gs = 4.5v, r l = 2.4 ? , r g = 1 ? , turn-on rise time t r ? 4.1 ? turn-off delay time t d ( off ) ? 17.9 ? turn-off fall time t f ? 4.7 ? reverse recovery time t r r ? 5.5 ? ns i f = 12a, di/dt = 500a/ s reverse recovery charge q r r ? 2.6 ? nc notes: 5. device mounted on fr-4 substrate pc board, 2oz copper, with 1inch square copper plate. 6. i ar and e ar rating are based on low frequency and duty cycles to keep t j = +25c 7. short duration pulse test used to minimize self-heating effect. 8. guaranteed by design. not subject to product testing.
powerdi is a registered trademark of diodes incorporated. dmg3025lfg document number: ds35642 rev. 5 ? 2 3 of 6 www.diodes.com november 2012 ? diodes incorporated dmn3025lfg new product 0 5 10 15 20 25 30 0 0.5 1.0 1.5 2.0 2.5 3.0 v , drain-source voltage (v) figure 1 typical output characteristic ds i, d r ai n c u r r e n t (a) d 0 5 10 15 20 25 30 01 2 3 45 v , gate-source voltage (v) gs figure 2 typical transfer characteristics i, d r ai n c u r r e n t (a) d v = 5.0v ds t = 150c a t = 125c a t = 85c a t = 25c a t = -55c a 0.005 0.015 0.025 0 5 10 15 20 0.010 0.020 0.030 0 i , drain-source current (a) d figure 3 typical on-resistance vs. drain current and gate voltage r , d r ain-s o u r ce o n- r esistance ( ) ds(on) v = 4.5v gs v = 10v gs 345678910 v , gate-source voltage (v) gs figure 4 typical on-resistance vs. drain current and gate voltage 0 0.02 0.04 0.06 0.08 0.10 r , d r ain-s o u r c e o n- r esis t an c e ( ) ds(on) i= 10a d 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0 5 10 15 20 25 30 0 i , drain current (a) d figure 5 typical on-resistance vs. drain current and temperature r , d r ain-s o u r ce o n- r esistance ( ) ds(on) t = 25c a t = 85c a t = 125c a t = 150c a v = 4.5v gs t = -55c a 0.6 0.8 1.2 1.4 1.6 1.0 -50 -25 0 25 50 75 100 125 150 t , junction temperature ( c) figure 6 on-resistance variation with temperature j r , d r ai n -s o u r c e on-resistance (normalized) ds(on) v = 4.5v i= 5a gs d v=v i = 10a gs d 10
powerdi is a registered trademark of diodes incorporated. dmg3025lfg document number: ds35642 rev. 5 ? 2 4 of 6 www.diodes.com november 2012 ? diodes incorporated dmn3025lfg new product 0.005 0.015 0.025 0.035 0.010 0.020 0.030 0.040 0 -50-25 0 255075100125150 t , junction temperature ( c) figure 7 on-resistance variation with temperature j r , d r ai n -s o u r c e o n - r esis t a n c e ( ) ds(on) v = 4.5v i= 5a gs d v=v i= 10a gs d 10 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 2.0 1.0 0 -50 -25 0 25 50 75 100 125 150 t , junction temperature ( c) figure 8 gate threshold variation vs. ambient temperature j v, g a t e t h r es h o ld v o l t a g e (v) gs(th) i= 1ma d i = 250a d 0 5 10 15 20 25 30 0 0.2 0.4 0.6 0.8 1.0 1.2 v , source-drain voltage (v) sd figure 9 diode forward voltage vs. current i, s o u r c e c u r r e n t (a) s t= 25c a 0 51015202530 v , drain-source voltage (v) ds figure 10 typical junction capacitance 10 100 1,000 10,000 c , j u n c t i o n c a p a c i t an c e (p f ) t c iss c oss c rss f = 1mhz 02 4 6 81012 v gate threshold voltage (v) gs q(nc) g , total gate charge figure 11 gate charge v = 15v i= a ds d 10 0.1 1 10 100 v , drain-source voltage (v) figure 12 soa, safe operation area ds 0.01 0.1 1 10 100 i, d r ai n c u r r e n t (a) d r limited ds(on) p = 10s w p = 1s w p = 100ms w p = 10ms w p = 1ms w p = 100s w p = 10s w t = 150c t = 25c j(max) a single pulse dc
powerdi is a registered trademark of diodes incorporated. dmg3025lfg document number: ds35642 rev. 5 ? 2 5 of 6 www.diodes.com november 2012 ? diodes incorporated dmn3025lfg new product 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1,000 t1, pulse duration times (sec) figure 13 transient thermal resistance 0.001 0.01 0.1 r(t), t r ansien t t h e r mal r esis t an c e 1 d = 0.7 d = 0.9 d = 0.5 d = 0.3 d = 0.1 d = 0.05 d = 0.02 d = 0.01 d = 0.005 single pulse r (t) = r(t) * r r = 72c/w duty cycle, d = t1/ t2 ? ja ja ja package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. powerdi3333-8 dim min max typ d 3.25 3.35 3.30 e 3.25 3.35 3.30 d2 2.22 2.32 2.27 e2 1.56 1.66 1.61 a 0.75 0.85 0.80 a1 0 0.05 0.02 a3 ? ? 0.203 b 0.27 0.37 0.32 b2 ? ? 0.20 l 0.35 0.45 0.40 l1 ? ? 0.39 e ? ? 0.65 z ? ? 0.515 all dimensions in mm dimensions value (in mm) c 0.650 g 0.230 g1 0.420 y 3.700 y1 2.250 y2 1.850 y3 0.700 x 2.370 x2 0.420 a a1 a3 d d2 e e2 b2 (4x) l (4x) l1 (3x) b (8x) e z (4x) pin 1 id 14 85 x y y1 y3 y2 x2 c 14 85 g g1
powerdi is a registered trademark of diodes incorporated. dmg3025lfg document number: ds35642 rev. 5 ? 2 6 of 6 www.diodes.com november 2012 ? diodes incorporated dmn3025lfg new product important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com
|
